Aluminium Floor Graphics
Aluminum Floor Graphic is a rugged aluminum foil material and is designed for textured rough or smooth surfaces. It is printed direct using UV cured inks making the product suitable for indoors and outdoors.
For Contour ct details and file set up please refer to the Details below link at the bottom.
This product ships in 1-2 days after your order is received.
Aluminum Floor Graphic is a rugged 20mil aluminum foil material and is designed to naturally conform to the texture of rough or smooth surfaces. The high-friction / slip-resistant surface improves the stability of pedestrian traffic in the area it is applied to. It's designed to withstand harsh weather conditions in both hot and cold weather conditions. It is Printed directly on the material using UV cured inks and the material is rated for outdoor use, this material would last long outdoors. Harsh conditions and /or extreme traffic may wear down the slip resistance and require the graphics to the replaced earlier for safety precautions. Indoor applications and locations with lighter pedestrian traffic can exceed life expectancy. This material surpasses anti-slip safety standards, both when wet or dry.
Bleed: ensure you have 0.5" on all sides of your artwork, do not add crops.
For contour cut orders, two separate files must be uploaded: one regular artwork file, and one cut mask file. The cut mask file must be an all vector, PDF file uploaded at the same time as the artwork file.
We cannot accept any cut mask files that are made using a raster based program (e.g. Photoshop).
- When being cut, the blade will follow the cut mask line you’ve created. It is recommended that you keep your perimeter cut line slightly inside the border of the image you are trying to cut out. This will avoid any obvious edges showing from your background once it is cut.
- Do not use small/thin cut areas, or have perimeter cut lines that are too close together. At least 0.5" must separate your perimeter cut lines from each other. ProntoPrints will not reprint any order with perimeter cut lines that are too close to one another.
- Your contour cut line should be a smooth fully closed path. No disconnected lines or open paths will cut. If your cut line is ragged or has any imperfections, they will show up in the final piece
Only one cut per order will be allowed. Please do not add multiple cuts in a single file.
ProntoPrints will not reprint any order attributed to improper file setup or layout.
